Monday, March 6, 2017

Circuit Schematic High-band DPD Demodulator with Integrated DSA and RF Switch using IDTF1370

Eltronicschool. - This is one very useful for you, circuit schematic that called with  High-band DPD Demodulator with Integrated DSA and RF Switch using IDTF1370 look like in Figure 1 below.

In this time, we will give you global description about this  High-band DPD Demodulator with Integrated DSA and RF Switch using IDTF1370 circuit schematic and we will allow you to red more about this circuit from original source.

Circuit Schematic

Component Part
  1. IDTF1370
  2. Coil Inductor
  3. Resistors
  4. Capacitors
Description

Circuit schematic like in Figure 1 above is  High-band DPD Demodulator with Integrated DSA and RF Switch using IDTF1370 circuit  that will give you high-performance DPD demodulator.

How it works

According Electroschematics site describe the IDTF1370 is a digital pre-distortion demodulator (DPD) for power amplifiers linearization in BTS transmitter that utilize the IDT zero-distortion, and glitch-free technology that offers customers an unparalleled high-performance DPD demodulator. It utilizes the technique called pre-distortion, in digital communication it is used to improve the linearity of the transmitter performance by pre-distorting a data to counteract the distortion inherent in the power amplifier. The F1370 has an RF channel range of 1300-2900MHz, it’s IF frequency ranges 20-500MHz, a typical gain of 12.5dB, +41dBm IP3o, and a High/Low side injection. The device features an integrated DPD IC for MIMO, which eliminates the need for external IF amps, baluns, switches, and DSAs thus reduce solution cost and space significantly. It has a reduction of greater that 1-Watt power consumption compared to conventional solutions.


Thank you for your coming here in www.eltronicschool.com site, we hope the article above will help you to know more about your an electronic circuit design and software in this time, etc. Please comment here when you want to share and other. Thank you.

0 comments:

Post a Comment

Thank's for your reading in this article, please don't forget to comment.