Monday, February 22, 2016

ZJchao Outrunner Brushless Motor RC Accessories Kit for RC Glider Helicopter Aircraft Quadcopter Copter Aircraft Multi-copter Review

Eltronicschool. - This is one motor component as brushless motor rc that suitable for RC Glider Helicopter Aircraft Quadcopter Copter Aircraft Multi-copter. This brushless motor rc is ZJchao Outrunner Brushless Motor RC Accessories Kit.


In here we will give you global review about ZJchao Outrunner Brushless Motor RC Accessories Kit like the description of this motor, product detail, reviewer opinion, and the last you allowed to check the price from online store. So, please follow this review until finish.

Description







Note: All image above come from Amazon

This is ZJchao Outrunner Brushless Motor RC Accessories Kit for RC Glider Helicopter Aircraft Quadcopter Copter Aircraft Multi-copter. This brushless motor have some specification as follow.

  • XXD A2212 brushless motor:
  • KV: 1000
  • Max Efficiency: 80%
  • Max Efficiency Current: 4-10A (>75%)
  • Current Capacity: 12A/60s
  • No Load Current @ 10V: 0.5A
  • No. Of Cells: 2-3 Li-Poly
  • Motor Dimensions: Φ27.5 x 30mm
  • Shaft Diameter: Φ3.17mm
  • Weight: 47g
  • 30A speed controller:
  • Output: Continuous 30A, Burst 40A up to 10 Secs.
  • Input Voltage: 2-3cells lithium battery or 5-9 cells NiCd/NIMh battery.
  • BEC: 1A / 5V (Linear mode).
  • Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
  • (BLM: BrushLess Motor)
  • Size: 45mm (L) * 24mm (W) * 11mm (H).
  • Weight: 25g.

Package Including: 

  • XXD A2212 1000KV Brushless Outrunner Motor with Mounts x1
  • 30A Brushless speed controller x1
Product Detail

  • Product Dimensions: 4.4 x 4 x 1.7 inches
  • Shipping Weight: 0.3 ounces 
  • ASIN: B00E7LG85O
  • Item model number: H6450
  • Manufacturer recommended age: 11 years and up
Reviewer Opinion

Now you can read more about the reviewer opinion below to know the satisfy using this ZJchao Outrunner Brushless Motor RC Accessories Kit.
  • Howy on March 22, 2014, "I was skeptical but I wanted to buy all cheap stuff for my first quad copter build. I bought 5 just in case one showed up bad. The collet adapters do not always fit just right so I was tightening down a prop and I could still remove the prop even though it seemed so tight I might crack the prop. After another hefty turn the metal shaft on the adpater broke (cant believe the prop was able to take all that pressure). So what I did with the other motors was add a smidgen of epoxy to the collet/shaft so I don't have to worry about tightening them down so much..."
  • Delrew on June 14, 2014, "These motors work well and have a good build quality. The prop adapters on the other hand are engineered to fail. The compression sleeve has no room to compress the clamp around the motor shaft. You can resolve this by ordering http://www.amazon.com/gp/product/B00AQBU1WA where the compression sleeve leaves around 20% and allows the prop nut to tighten to the motor shaft as it should.The ESC's came with a programming guide."
  • Read more other reviewer opinion here.
Price Checking

And now you can check the price of ZJchao Outrunner Brushless Motor RC Accessories Kit using link button below.




Thank you for your coming here in www.eltronicschool.com site, we hope the article above will help you to know more about your an electronic circuit design and software in this time, etc. Please comment here when you want to share and other. Thank you.

3 comments:

  1. Also, flying this RC vehicle has turned into a lifetime side interest for some devotees, which shows the kind of force that this movement practices over enthusiastic flyers.Best RC Helicopter

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. This comment has been removed by the author.

    ReplyDelete

Thank's for your reading in this article, please don't forget to comment.