Wednesday, September 17, 2014

The Max2681 Sige Downconverter Mixer Tuned For GPS Front Ends Circuit Schematic

Eltronicschool. - As we know that GPS (Global Positioning System) is very important device in this day to know the position of our tool that inserted with GPS. GPS tracker many used in transportation field to detect the position of the vehicle where.

In here we will give you simple circuit schematic of GPS that titled with The Max2681 Sige Downconverter Mixer Tuned For GPS Front Ends Circuit Schematic like in figure 1 below.

Circuit Schematic

Figure 1. The Max2681 Sige Downconverter Mixer Tuned For GPS Front Ends Circuit Schematic

Component List

The main component of the circuit schematic like in figure 1 above is IC MAX2681

Description

The Global Positioning System (GPS) is a space-based global navigation satellite system (GNSS) that provides location and time information in all weather, anywhere on or near the Earth, where there is an unobstructed line of sight to four or more GPS satellites. The GPS project was developed in 1973 to overcome the limitations of previous navigation systems,[1] integrating ideas from several predecessors, including a number of classified engineering design studies from the 1960s.   

A GPS receiver calculates its position by precisely timing the signals sent by GPS satellites high above the Earth. Each satellite continually transmits messages that include the time the message was transmitted precise orbital information (the ephemeris) the general system health and rough orbits of all GPS satellites (the almanac).


Thank you for your coming here in www.eltronicschool.com site, we hope the article above will help you to know more about your an electronic circuit design and software in this time, etc. Please comment here when you want to share and other. Thank you.

0 comments:

Post a Comment

Thank's for your reading in this article, please don't forget to comment.