Monday, September 22, 2014

Ponyprog Circuit for AVR & PIC16F84 by Electronic-Lab Project

Eltronicschool. - In this time we will continue give you information about electronic project that coming from electronic-lab project with the title Ponyprog Circuit for AVR & PIC16F84. Beside we will give you the pictures of the project, in here we also will give you link to download all article in pdf file.

Circuit schematic

Figure 1. Ponyprog Circuit for AVR & PIC16F84
Figure 2. Ponyprog Assembly for AVR & PIC16F84

Component List:


Ponyprog Circuit for AVR & PIC16F84 by Electronic-Lab Project show in figure 1 and figure 2 above. According information that All resistors are 1/4W.The circuit is powered by 9...15V DC or AC. When In Circuit Programming (ISP) connectors are used, is possible the programmer to be powered from target’s power source. Diodes D2 and D6 protect the regulator LM7805, when target’s power is used.

' XTAL JUMP ' is used to cut XTAL when the AVR has internal RC oscillator enabled.

'FAMILY JUMP' is used to select which ATMEL’s family to program, AVR series (ATtinyXX, AT90SXXXX, ATmegaXXX) or 8051 series (AT89Sxxxx).

‘PIC JUMP’ is used to switch between Microchip’s PIC and ATMEL’s microcontrollers. With jumper ON only PIC can be programmed, while OFF can program ATMEL’s microcontrollers. If you don’t need to program PICs, you can leave their board area unsoldered. The PCB has been designed so that DIP sockets or ZIF sockets can be used. Because of its cost, it is recommended that only one ZIF is used combined with some pin-arrays to switch between the four different places.

And the type or series of microcontroller that suitable with the Ponyprog Circuit for AVR & PIC16F84 by Electronic-Lab Project as follow:

ATMEL’s AVR series

ATtiny12, ATtiny15, AT90S1200, AT90S1200A, AT90S2233, AT90S2313, AT90S2323, AT90S2343, AT90S4414, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega163, ATmega323, ATMEL’s 8051 series, AT89S53, AT89S8252


PIC16x83, PIC16x84, PIC16F84A

And some other programmable ICs (memories, microcontrollers) which Ponyprog support but need a board adapter to be programmed through ISP connectors. For more information see Claudio Lanconelli site .


And all version of Ponyprog Circuit for AVR & PIC16F84 by Electronic-Lab Project, you can download here.

Thank you for your coming here in site, we hope the article above will help you to know more about your an electronic circuit design and software in this time, etc. Please comment here when you want to share and other. Thank you.


Post a Comment

Thank's for your reading in this article, please don't forget to comment.