Wednesday, March 26, 2014

Simple Electronic Circuit Schematic Stereo Headphone Amplifier using IC LM4910

Eltronicschool. - One integrated circuit (IC) that used for stereo headphone amplifier application is IC LM4910. When we use IC LM4910 to make our stereo headphone amplifier, we will get some advantages as follow:

  1. Can operated with low voltage, 3.3 volt
  2. Output power 0.35 mW with 32 ohm load.
  3. Very low distortion ( less than 1%)   and the shutdown current is less than 1uA.
  4. Suitable for battery operated applications
  5. Turn ON/OFF click elimination
And in this time we will show you the electronic circuit Stereo Headphone Amplifier using IC LM4910 as like in figure 1 below.

Circuit Schematic

Figure 1. Circuit Schematic Stereo Headphone Amplifier using IC LM4910 (Circuitstoday)

Component List
  1. C1, C2 = 0.39 uF
  2. C3 = 1 uF
  3. R1, R2, R3, R4 = 20K
  4. IC = LM4910 
  5. VCC = 3.3 Volt


Circuit schematic stereo headphone amplifier using IC LM4910 like in figure 1 above, show us that it is very simple circuit and useful circuit schematic. From the circuit above we can describe that C1 and C2 are the input DC decoupling capacitors for the left and right input channels. R1 and R2 are the respective input resistors. R3 is the feed back resistor for left channel while R4 is the feed back resistor for the right channel. C3 is the power supply filter capacitor. The feedback resistors also sets the closed loop gain in conjunction with the corresponding input resistors. (Source:Circuitstoday)

Thank you for your coming here in site, we hope the article above will help you to know more about your an electronic circuit design and software in this time, etc. Please comment here when you want to share and other. Thank you.


Post a Comment

Thank's for your reading in this article, please don't forget to comment.